content-left-bg.png
content-right-bg.png

Climbing and abseiling (artificial surfaces)

WebPartZone1_1
PublishingPageContent

​​​​​​​​​​Guideline review date: 24 September 2025

This guideline is provided to support schools in implementing the managing risks in school curriculum activities procedure.

The CARA planner (DOCX, 232KB) must be used for the specific school context in conjunction with this guideline considering additional risks, hazards and controls and including environmental, facility, equipment and student considerations.

For activities beyond the scope of this guideline, complete a CARA record using the CARA generic template (DOCX, 98KB).​​​

WebPartZone1_2

Activity scope

This guideline demonstrates the minimum safety standard for student participation in climbing and/or abseiling on artificial surfaces with specialised equipment and ropes an activity to support curriculum delivery. This refers to any activities involving climbing and abseiling on all artificial climbing walls and abseiling towers specifically constructed for this purpose, including those in gymnasiums. It also includes single-pitch top rope climbing and abseiling and multi-pitch climbing and abseiling activities.

The Department of Education is committed to ensuring that curriculum activities are planned for and managed in accordance with the Work Health and Safety Act 2011 (Qld), to ensure, as far as is reasonably practicable, the safety of students, staff and others.

Depending on the scope of this activity, other risk assessments may be required when planning. Curriculum activities encompassing more than 1 CARA guideline (e.g. challenge low ropes and group activities while camping) must comply with the requirements of all CARA guidelines appropriate to the activity.

Schools should consider conducting this activity at a Department of Education Outdoor and Environmental Education Centre (OEEC) and consult with OEEC centre staff for risk assessment requirements.

For activities conducted at a non-Department of Education venue, and/or when engaging external expertise, request written risk assessment advice and attach it to this CARA record.

For activities conducted off-site, schools must comply with the school excursions procedure.

Risk level

High risk:
Single-pitch climbing, top rope climbing, but not lead climbing.
Extreme risk:
Multiple-pitch climbing, single-pitch lead climbing, single- or multiple-pitch abseiling. Small, specialised groups only. These activities are unsuitable for class groups.

Refer to glossary for further information.

Activity requirements

If any requirement cannot be met, the activity must not occur.

A registered teacher must be appointed to maintain overall responsibility for the activity.

Teachers, in collaboration with other adult supervisors of the planned activity, determine additional risks, hazards and control measures relevant to the activity and the specific school/group circumstances in order to lift the safety standard above the minimum identified in the CARA guideline.

Consult review comments from previous CARA records to improve safety standards based on the advice from the previous supervisors of the activity at the school.

Prior consultation and collaboration with local expertise (e.g. venue manager) is required for local advice, emergency support mechanisms and additional supervision requirements to ensure participant and public safety.

Reference to Australian adventure activity standard and abseiling and climbing Australian adventure activity good practice guide (PDF, 746KB) is required when planning this activity.

Permission/permits are required to be obtained from land managers (e.g. local councils or private landholders), if applicable.

Assessment and management of risks associated with working at heights must occur.

Inspection and maintenance of the artificial climbing structure must comply with both requirements below:

  • AS2316.2.2:2016—artificial climbing structures and challenge courses flying foxes and challenge ropes courses—operation requirements
  • AS2316.1-2009—artificial climbing structures and challenge courses—fixed and mobile artificial climbing and abseiling walls.

Routine visual checks to be carried out by a competent person before each use of the artificial surface to ensure there is no obvious damage; the site is safe; and the integrity of the safety systems.

Operational inspection to be carried out by a competent person every 3 months, or as indicated in the manufacturer's instruction to confirm no damage or degradation.

Periodic inspection to be carried out at least once every year by an independent certified inspection body (e.g. registered builder of artificial climbing structures) and to include routine visual check; operational inspection; assessment of worn components and where the inspector deems necessary dismantling of parts; excavation to reveal condition of items underground and/or routine proof testing.

Record and/or certification of inspection of artificial surfaces must be made available to participating schools.

Supervision

Principals, in consultation with the qualified adults, make final supervision decisions for the activity that considers the local context.

Appropriate adult supervision must be provided to manage the activity safely (i.e. prevent an incident from occurring and manage an incident if one were to occur, including managing emergency situations). The principal must give active consideration to the minimum standards set in the CARA guideline for the activity, the CARA planner and the risk assessment when determining the appropriate level of supervision.

See number of adult supervisors below.

Participants must adhere to all rules and advice communicated by the facility operator/owner and any safety signage at the facility/location.

Before the activity, all adult supervisors:

  • must be familiar with the contents of the CARA record, including the emergency and supervision plans.

During the activity, all adult supervisors:

  • must provide active and direct supervision—be constantly vigilant, attentive and rescue ready
  • must remove participants for the safety of the group or individuals, if applicable
  • must comply with control measures from the CARA record and adapt as hazards arise
  • must not rely on students to recover a person in difficulty at any time.

The activity must be suspended if the conditions become unfavourable (e.g. thunderstorms).

Number of adult supervisors

Principals, in consultation with the qualified adults of the activity, determine the final number of supervisors to fulfil instructional, emergency and supervision roles for the local context that consider the nature of the activity (climbing/abseiling elements, belay system—top managed, bottom managed or autobelay), students' ages, abilities and specialised learning, access and/or health needs. In some instances, the final supervision ratio may be 1:1. The abseiling and climbing Australian adventure activity good practice guide (PDF, 746KB) should be consulted for supervision ratios.

At least 2 adult supervisors, one of whom is a registered teacher must be present. In certain situations, there may need to be smaller or larger numbers of participants per adult supervisors.

Due to the risk associated with falls from height, the safe conduct of these activities requires the use of spotters in order to protect the participant's upper body and head from heavy contact with the ground. Spotters are required when the feet of the participant are up to 1.8m above the ground (e.g. lead climbing activities before first clip) (AS 2316.1-2009).

If the minimum safety standard cannot be met, modify the activity (or elements of it) and use the hierarchy of controls to implement alternative control measures to meet or exceed the minimum safety standard (e.g. reduce the number of students participating at any one time).

See frequently asked questions (FAQs) for further support.

Supervisor qualifications

Qualifications support the minimum safety standard for this activity. Principals make final decisions* in determining supervisor capability (competence, relevance and currency) and whether the activity leader meets an appropriate teaching standard.

*See FAQs for further support.

All adult supervisors must comply with the working with children authority—blue cards procedure.

Qualified adults for the activity

Recovery/emergency—CPR, first aid, rescue

An adult with current emergency qualifications is required to be quickly accessible to the activity area.

Supervisors must have CPR and first aid qualifications relevant to the activity. Emergency qualifications may include:

An adult with concussion management knowledge or training is recommended. Consult concussion in sport resources.

High risk activities

At least 1 adult supervisor is either:

Extreme risk activities

At least 1 adult supervisor is either:

Refer to the competencies outlined in the abseiling and climbing Australian adventure activity good practice guide (PDF, 746KB) for guidance.

See FAQs for further support.

Facilities and equipment

The qualified adult supervisor of the activity, in consultation with the principal, determines the requirements for facilities and equipment appropriate to the local context. Refer to the equipment requirements outlined in the abseiling and climbing Australian adventure activity good practice guide (PDF, 746KB) for guidance.

Vehicle access must be available at all times.

Inspection of staging and climbing areas must occur immediately prior to the activity.

Matting/soft fall of sufficient density to absorb body impact on the floor must be at the base of the climbing wall in accordance with AS2316.1-2009.

Base of climbs/abseils must be cleared of potential hazards.

All facilities, structures (e.g. wall fixtures) and equipment (e.g. ropes, harnesses, slings, carabiners and chocks) used must be manufactured specifically for rock climbing/abseiling and must comply with the Australian Standards AS 2316.1-2009 for use and maintenance and International Climbing and Mountaineering Federation (UIAA) specifications.

All equipment (e.g. ropes, harnesses, slings, carabiners and chocks) manufactured specifically for rock climbing/abseiling and must comply with the Australian Standards AS 2316.1-2009 for use and maintenance and International Climbing and Mountaineering Federation (UIAA) specifications.

Equipment must be:

  • sized to match the ability and strength of students
  • used in accordance with the manufacturer's instructions
  • manufactured for use in the context of the activity and meet the relevant EN, UIAA/CE or Australian Standard.

Abseiling/rappelling rope long enough for the descent and a top-rope safety rope used in addition to the abseiling/rappelling rope.

Harnesses, helmets, ropes and lanyards must be provided for all and must meet UIAA safety standards, EN358, EN361, EN813, EN12277, AS/NZS1891.4 or equivalent.

Harnesses must be:

  • worn at all times and fitted correctly when on course, and connected by a safety line (rope or webbing/tape) to an appropriate anchor point or belay
  • connected by a safety line (rope or tape) to an appropriate anchor point or belay where exposure to a fall exists.

Helmets that meet UIAA or EN12492 standards must provide appropriate for protection from falling objects be correctly fitted and secured for the duration of the activity.

The belay system or lanyard arrangement to be appropriate for the expected fall factor of a climber to minimise risk of strangulation.

Appropriate vertical rescue equipment suitable for unassisted abseil, and/or haul and lower rescue techniques must be readily accessible.

Participants to wear appropriate outfit that meet both of the below criteria:

  • clothing appropriate for the activity and weather conditions
  • firmly fitting, enclosed non-slip footwear appropriate to the terrain.

Consider using backpacks to carry equipment and edge protectors to protect ropes from abrasion damage.

Establish and employ a process for checking for damage for all equipment used in the activity.

A log of equipment use, maintenance and inspection for each course must be kept and made available to participating schools upon request.

A retirement schedule must be developed to replace equipment by manufacturers' nominated expiry date or when significant wear causes a hazard.

Common hazards and controls

Further to those listed, include any additional hazards and control measures considering the local context of the activity.

Environmental hazards Control measures
Environmental conditions
Weather, surfaces, surrounds

If artificial climbing occurs outdoors, assess weather conditions prior to undertaking the activity, inspecting the intended location in order to identify variable risks, hazards and potential dangers.

Follow the school's sun safety policy, including appropriate clothing, sun protection (e.g. sunscreen) and shade facilities when outside.

Follow the managing excessive heat in schools guidelines when participating in very hot or extreme heat conditions.

Monitor participants for cold related illness (e.g. hypothermia) in cold weather conditions. Note: sudden temperature changes may trigger seizures

Facilities and equipment hazards Control measures
Activity location Location must be suitable for the activity being undertaken to ensure safe participation and that safety rules and procedures can be followed. Undertake a reconnaissance of new or infrequently used venues to ascertain suitability
Faulty or dangerous equipment

Remove any equipment from the activity area that poses a risk to participants.

Ensure all safety equipment is in place and in good condition

Student considerations Control measures
Injury Students aware of the location of emergency and first-aid equipment
Physical exertion
Exhaustion and fatigue

Conduct warm-up/cool-down activities.

Monitor students for signs of fear, hesitancy, loss of balance, fatigue, disorientation and/or exhaustion.

Ensure drink breaks occur regularly. Make water available for individual participants between drink breaks

Student issues

Conduct appropriate lead-up activities (e.g. trust, cooperation, communication).

Provide suitable options to allow 'challenge by choice'.

Provide scaffolded experiences to build participant skill level, knowledge and experience.

Adopt a system of signals to clearly communicate the need for assistance if in difficulty.

Guide students through an activity or provide a demonstration prior to undertaking the activity.

Remove accessories (e.g. jewellery) before participating.

Ensure fingernails and hair do not pose a hazard.

Implement procedures (e.g. buddy system, roll marking mechanisms) to account for all participants before, during and after the activity

Visibility

Have students wear easily identifiable clothing (e.g. high visibility clothing).

Ensure staff can easily recognise those students with health support needs and are familiar with their needs

Glossary

Abseiling: descending vertical or near vertical natural surfaces or artificial surfaces using ropes and descending friction devices to manage the descent. It is also known as rappelling.

Belaying: refers to a variety of techniques used in climbing to exert friction on a climbing rope so that a falling climber does not fall very far.

Climbing: ascending, traversing or descending vertical or near vertical natural surfaces or artificial surfaces. (Also see Rock climbing).

Lead climbing: where the climber ascends a pitch while periodically attaching their rope to fixed or removable protection.

Multi-pitch: a section of a natural surface or artificial surface that to ascend, traverse or descend, progress is made by using more than one pitch and establishing belay systems mid route.

Rock climbing: ascending, traversing or descending vertical or near vertical natural surfaces. At times also used to describe climbing on artificial surfaces (also see climbing).

Single-pitch: a section of a natural surface or artificial surface that requires no greater than one length of rope to ascend, traverse or descend.

Top rope climbing: climbing where the belay system has its anchor or anchor system at the top of the pitch and uses either a top belay or bottom belay.

Webbing/tape: climbing specific tubular nylon webbing pressed flat. It is very strong. It can be made of Spectra/Dyneema or in combination with nylon.

Additional links

Disclaimer

This information is developed and distributed on this website by the State of Queensland for use by Queensland state schools only.

Use or adaptation of, or reliance on, this information by persons or organisations other than the State of Queensland is at their sole risk. All users who use, adapt or rely on this information are responsible for ensuring by independent verification its accuracy, currency and appropriateness to their particular circumstances. The State of Queensland makes no representations, either express or implied, as to the suitability of this information to a user's particular circumstances.

To the full extent permitted by law, the State of Queensland disclaims all responsibility and liability (including without limitation, liability in negligence) for all expenses, losses, damages and costs arising from the use or adaptation of, or reliance on, this information.

Links to external websites are for convenience only and the State of Queensland has not independently verified the information on the linked websites. It is the responsibility of users to make their own decisions about the accuracy, currency, reliability and correctness of the information at these external websites.

WebPartZone2_1
WebPartZone2_2
WebPartZone2_3
WebPartZone3_1
WebPartZone3_2
WebPartZone3_3
WebPartZone3_4
WebPartZone4_1
WebPartZone5_1
WebPartZone5_2
WebPartZone6_1
WebPartZone6_2
WebPartZone7_1
WebPartZone7_2
WebPartZone8_1
WebPartZone8_2
WebPartZone9_1
Last updated 24 September 2025